Vehicle models, character models, commercial kits, custom kits, and so on.
jakejoke32
Posts: 72 Joined: Thu Oct 28, 2010 8:53 am
Post
by jakejoke32 Fri Mar 30, 2012 9:02 am
enjoy the pictures my fellow fans.
i usually build all of these weatherd and dirty, this time, i went for a clean look, as a some detail gets lost in the weathering sometimes.
LISTING PHOTO 1.JPG (96.33 KiB) Viewed 3480 times
LISTING PHOTO 3.JPG (99.64 KiB) Viewed 3480 times
LISTING PHOTO 4.JPG (97.64 KiB) Viewed 3469 times
Attachments
LISTING PHOTO 5.JPG (94.28 KiB) Viewed 3480 times
HighOctane
Posts: 19 Joined: Sat Feb 18, 2012 4:25 pm
Post
by HighOctane Fri Mar 30, 2012 12:43 pm
Well done man! Those look fantastic.
Nightwalker
Posts: 1342 Joined: Tue Aug 16, 2005 9:43 amLocation: In a country that's 26% below sea level.
Post
by Nightwalker Sat Mar 31, 2012 10:59 am
Very nice job indeed. Guess that's tough building these on a 1/64 scale.
"UNDERSTEER" is when you hit the fence with the front of the car.
"OVERSTEER" is when you hit the fence with the rear of the car.
"HORSEPOWER" is how fast you hit the fence.
"TORQUE" is how far you take the fence with you.
PursuitSpecial
Posts: 634 Joined: Mon Jul 23, 2001 2:54 pm
Post
by PursuitSpecial Sat Mar 31, 2012 9:28 pm
Great job, these have some of the best detail I've seen.
_________________
highfatalityroad
Posts: 96 Joined: Sun Jan 29, 2012 12:09 pmLocation: fascist-occupied territory aka Mexifornia
Post
by highfatalityroad Sat Mar 31, 2012 10:49 pm
those are really excellent, I hope you get what you are asking for them.
Chase Bansi
Posts: 1157 Joined: Mon Oct 03, 2005 4:35 am
Post
by Chase Bansi Tue Apr 03, 2012 6:53 am
Very impressive, especially as a whole set. Did you make your Jerry cans out of styrene? They are one thing I have not found a suitable doner for with the 100s of cars I've looked at.
_____________________________
No matter where you go, there you are MFP 5863
jakejoke32
Posts: 72 Joined: Thu Oct 28, 2010 8:53 am
Post
by jakejoke32 Tue Apr 03, 2012 9:01 am
yeah, just shaped a few pices of styrene, i could not find anything already made either.
highfatalityroad
Posts: 96 Joined: Sun Jan 29, 2012 12:09 pmLocation: fascist-occupied territory aka Mexifornia
Post
by highfatalityroad Mon Apr 23, 2012 8:30 pm
well your cars are doing quite well on ebay as separates right now.
aussie muscle
Posts: 969 Joined: Tue Apr 18, 2006 7:00 amLocation: Bombala Australia
Post
by aussie muscle Mon Apr 30, 2012 9:09 pm
that's pretty darn good for such small toys. you just need to look at printing your own decals (glue paper on looks too thick) on the bat xa.
